Bondloc B638 Retainer
Bondloc B638 Retainer is designed to give High Strength Retention under Cyclic loading. B638 will retain its full strength and not suffer fatigue under load stress.
Available in 10ml or 50ml bottles.
In stock
SKU
I100-B638-xxx
Bondloc B638 Retainer is designed to give High Strength Retention under Cyclic loading. B638 will retain its full strength and not suffer fatigue under load stress.
B638 is a cylindrical parts supplement, suited to Structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerence fit.
Surface keying action is greatly increased by rough surface finish giving higher shear strength. Ideal roughness is between 10 - 120 microns with a preferred tolerance of between 30 - 100 microns.
| Technical Features | |
| Resin | Urethane Acrylate |
| Colour | Green |
| Fixture Speed with Activator | < 5 Minutes |
| Fixture Speed without Activator | 5 Minutes |
| Viscosity Brookfield Sp3 at 20rpm at 25°C | 2500 cps |
| Gap Fill | 0.2mm |
| Flash Point | > 85°C |
| Specific Gravity | 1.08 |
| Temperature Range | -55°C to +180°C |
| Full Cure Time | 24 hours |
| Shear Strength | > 31N/mm2 |
| Brand | NA |
|---|---|
| Type | B638 |
